1964-66 Ford Mustang
Click on thumbnail to enlarge picture
After looking at these pictures, there isn't too much to say is there? One thing that we do that most others don't is make previsions for a foot well so you actually have some place to put your feet. Because your chassis is the backbone of your street rod, LRS prides itself in fabricating one of the finest quality street rod frames in the industry. Our frames are uniquely fabricated from flat 11 gauge P&O plate. This allows us to weld the body mounting nuts inside the frame rails instead of using nut zerks that others use. We have our pieces laser cut so we are ensured of getting the same piece each time. We then fit the pieces on our rail jigs, square them and weld. All welds are then ground and inspected to verify that they have complete penetration and no porosity. They are then sanded with 50 grit to prep it for finishing. The rails are placed into our rotisserie frame fixture and tack welded to the fixture to eliminate movement while the frame is constructed and T.I.G. welded. Sounds like a lot of work? Yes, it is, but this is the way we choose to build your quality chassis. From start to finish, it takes 6 to 7 days to complete, depending on the number of coffee and smoke breaks we take! Many options are available for your completed chassis. Please feel free to call us with any other ideas you may have. We look forward to doing business with you.
Mustang Perimeter Frame
Rails, center tubular cross member with removable transmission mount, rear coil over bar
$ 6,067.00
Mustang Rolling Chassis
Perimeter frame, hub to hub complete front suspension with Wilwood calipers, Ford 9" rear housing with axles and 3rd member (any ratio), 10" rear drum brakes, rear coil over shocks.
$ 11,500.00
Shipping Charges Additional
Prices & Design Subject to Change Without Notice
Ph: 417-466-4883
Fax: 417-466-2556