1941-1948 Ford Chassis
Because your chassis is the backbone of your street rod, LRS prides itself in fabricating one of the finest quality street rod frames in the industry. Our frames are uniquely fabricated from flat 11 gauge P&O plate. By using our high definition
plasmas and 14' pattern tracer, we are ensured of getting the same piece each time. We then fit the pieces on our rail jigs, square them and weld. All welds are then ground and inspected to verify that they have complete penetration and no porosity. They are then sanded with 50 grit to prep it for finishing. The rails are placed into our rotisserie frame fixture and tack welded to the fixture to eliminate movement while the frame is constructed and T.I.G. welded. Sounds like a lot of work? Yes, it is, but this is the way we have chosen to build your quality chassis. From start to finish, it takes 6 to 7 days to complete, depending on the number of coffee and smoke breaks we take! Many options are available for your completed chassis. Below are just a few ways to order; however, please feel free to call us with any other ideas you may have. We look forward
to doing business with you. Please note that our completed chassis prices include many options that other shops do not.
Economy Chassis
(Includes the following T.I.G. welded to Chassis)
Front Heidt's Mustang II Cross Member and Hats
Master Cylinder Mount
Brake Pedal
Tubular Mustang II Strut Rods
$4,695.00
Options
(Installed prices, T.I.G. welded to Chassis where applicable)
| Complete IFS Front End (w/GM Disc Brakes) | 2781.60 | Rear Adjustable Coil-Overs | 438.00 |
| Motor Mounts Standard (SB Chevy/Ford) | 117.60 | Polished | 512.40 |
| Tubular | 158.40 | Polished/Chrome Springs | 661.20 |
| Polished S/S Tubular | 290.40 | Lower Coil-Over Mounts | 136.80 |
| Power Brake Assembly (Complete) | 422.40 | Rear Panhard Bar (w/brackets) | 148.80 |
| "C" Notch Frame Rails | 108.00 | Chrome | 201.60 |
| Parallel Rear Leaf Springs (w/shocks) | 657.60 | Polished Stainless Steel | 259.20 |
| Pro Street | 720.00 | Rear 9" Housing(56"w,axles,bearings,seals) | 675.00 |
| Rear Ladder Bars | 547.20 | Rear 9" Housing with Drum | 1125.00 |
| Chrome | 777.60 | Rear 9" Housing with Disc | 1375.00 |
| Polished Stainless Steel | 998.40 | 3rd Member Open (any ratio) | 700.00 |
| 3rd Member Posi (any ratio) | 975.00 | ||
| Housing Round Back | 95.00 |
Shipping Charges Additional
click here for additional chassis parts
Prices & Design Subject to Change Without Notice
Ph: 417-466-4883
Fax: 417-466-2556